OK guys first off I would like to thank www.healthcabin.net for sending this across so go and show them some love and give them some follows on social media.

OK so the wotofo profile. Now as we all know Wotofo make some good vape items and anything I have had so far has never let me down. Yet again another good rda.

look at this pretty little bugger.

This was a colab with JUSTRIGHT1 who is an American reviewer over on youtube.

so this is a mesh/single coil rda. now this is what I would call or say is a bottom feeding squint rda. Thats were I would say the market is for this.

so its

1. Flavor can be broken down layer upon layer
2. Break-through mesh style heating element
3. Easy to switch between mesh and wire coils
4. Spring-loaded ceramic support ensuring contact between mesh and cotton
5. 24mm sleeve with accurate air inflow
6. Experience from cool vape to warm vape
7. Up to 30 puffs at 75W before needing to resaturate the wick when using pancake wicking method

its a 24mm by 32.5mm with a 810 resin drip tip. adjustable top air flow thats a decent air floe ive been running mine half open mainly.

in the box your gonna get

1pc Profile RDA
1pc User Manual
1pc 6mm Cotton Strip
1pc Extra 810 Drip Tip
1pc MESH Bending Tool
1pc Clapton Coil x 1 pc
1bag Mesh Style Coil x 2 pcs
1bag Extra Orings & Screws

not the mesh coil in the box is a 16/6.8mm 0.18 ohm kenthal coil thats recommended at 40-60w

is my view.

I am not a mesh vape at all. BUT as far as mesh go’s this is the best I have tried very well built and a good hitter. Easy to build on and a good looking rda

the only bad point I can find is the spring loaded plate in my view needs a stronger spring to push the cotton up harder to the coil

so at £26.88 from health cabin.net its an ideal mesh rda especially for those new to building

check out the video here (first ever decent video)

so all in all a good little rda

vape safe and stay safe guys