This Geekvape E100i Aegis Eteno 100w is sober, small and also powerful. Let’s get started the Geekvape E100i Review together!
It is made up of an electronic box which is also waterproof and dustproof (understand waterproof water and dust), and an atomize of 4.5ml.
The Geekvape E100i Aegis Eteno Kit arrives in a box in the name of the brand comprising all the accessories that can be seen in the video.
Regarding the Geekvape Aegis Eteno 2, it is very well finished and has a very nice little style mixing rubber, metal and leather.
One of the faces is flat and includes an easily readable screen with all the necessary and useful information.
It is on this side that we will find the buttons to order the box.
A large main button which falls well under the finger and which serves
- On/Off the battery when you make 5 close short supports.
- Navigate the battery options when making 3 close short supports.
- Vape when you make long supports.
Lower, there are also two buttons (+ and -) which is used to adjust the box.
On the top of this AEGIS ETENO E100i Box 100W, we find the magnetic location allowing it to accommodate the atomizer.
Regarding the operation of this geekvape E100i, it’s pretty good.
It starts quickly, the screen is of good quality and the settings are intuitive.
The chipset (box program) is very reactive and when you press the button to vape, there is almost no latency, the vape begins directly, which is a good thing for low and delicious resistance in watts.
The watts, the volts, the number of seconds and the number of puffs are displayed on the screen.
The atomize geekvape gives a good amount of smoke, the return of the flavors is good and so far I have no leak in use.
On the side, there is a button that will allow you to lock the ECIG when it is not used
And below the + buttons – we will find the USB type C port.
Good points
- Restaurants of flavors
- Design
- Ease of use
- Capacity of the 4.5 ml tank
- Easy filling from top
Negative points
- RAS
- Brand: Geekvape
- Model: Geekvape E100i Aegis Eteno
- Type: electronic cigarette
- Battery capacity: 3,000 mAh
- Output power: 5W-100W
- Output mode: smart/power/amplification/VPC/TC-Ni/TC-Ti/TC-SS/TC-TCR
- Maximum output current: 35 A
- Maximum output voltage: 7.5 V
- Loading: USB C
- Display screen: 1.06 inches, color screen TFT
- Operating temperature: 0C - 45C
- Storage temperature: -20c - 60c
- Relative humidity: 45 % HR - 75 % HR
- Capacity: 4.5 ml
- Product size: 39.56 x 33 x 134.5 mm
- 1 geekvape MODVape E100i
- 1 Pod Geekvape E100 (4.5 ml)
- 2pc geekvape p series coil
- 1 spare parts
- 1 USB cable (type-C)
- 1 coil tool
▶ Modes
- Smart
- Power
- Boosting
- VPC
- TC-Ni
- TC-Ti
- TC-SS
- TC-TCR
▶ Equipped with a 1.06 inch TFT color screen, it can clearly show the necessary vaping information.
▶ Suitable for a 4.5 ml pod E100 with an air flow from top to bottom and a geekvape P coil, it can offer a longer lifespan.
It also supports the pod to switch to the tank with a 510 magnetic adapter.
▶ E100i has the 2nd generation of Tri-Proof Tech Geekvape, water, dust and IP68 shock resistance.
Thanks Healthcabin for sending me this Geekvape E100i kit to make the video.
This review was written by Tofanger from Youbube, he also took an unboxing video for Geekvape E100i Kit, click the video directly to view.
