Roll up… Roll up. Hello my fellow vapers today we have the new kit from Voopoo The Drag Nano 2. This was very kindly sent to me from Healthcabin. Let’s get started the Voopoo Drag Nano 2 Review together!
As always this review is my own thoughts and not associated with anyone from Healthcabin or POTV. Nor have I been paid for my thoughts.
Abit about the kit
As you can tell from the name this isn’t the first drag nano in the range with the first being released in, 2019. Before this voopoo drag range were box type mods, they have since ventured into the nano range and these are made for any vaper from beginner to experienced aimed at being a small discreet mtl vape.
The Drag nano comes in 8 colour types with 5 being leather and 3 having a shiny sticker type finish. For this review I recieved the green leather.
- 1 x DRAG Nano 2 Device
- 1 x DRAG Nano pod 0.8ohm
- 1 x DRAG Nano pod 1.2ohm
- 1 x USB-C Cable
- 1 x Lanyard
- User Manual
- Size: 72 x 44 x 14.2mm
- Battery: 800mAh
- Pod Material: PCTG (Plastic)
- Mod Material: Zinc Alloy + Leather (or PC)
- Output Power: 8-20W
- Output Voltage: 3.2-4.2V
- Charging: 1A USB-C
- Resistance Range: 0.1-3Ohms
Mod
This small little device houses a 800mah battery and is charged via type C charging. I found it took around 45 minutes to fully charge.This kit works solely on auto draw and it works very well with very little wait time or mis firing.
On either side of the battery section there is a leather patch, one side has drag stamped into it and the other side voopoo in smaller print.
On the front of the device you have an airflow adjuster, a button and 3 led indicators.
The bottom you have the USB type C charging port and on the top you have a lanyard ring.
The button on the front is only used to turn the device on and off and change the wattage on the device.
The led lights indicate both the battery level and power setting, voopoo have made the battery indicator easy to understand with each led light indicating 1/3 of the percentage this is shown by a white led light.
• 0 – 33% = 1 LED light
• 33 – 66% = 2 LED lights
• Above 66% = all 3 LED lights
Also you can adjust the wattage with the same button by pressing it 3 times within 2 seconds you can then flick through 3 different colours and these indicate the power settings these are.
• Blue = Minimum power
• Green = Medium power
• White = Maximum power
Above these lights voopoo have added an airlfow adjuster which is brilliant this works on a little slider which has a nice resistance to it with no worries of it changing in your pocket. With the airflow adjustability depending on which pod you have installed you can get a very tight mtl to a restricted draw on this kit.
Pods
The Drag nano 2 kit comes with 2 pods and these are non removable coils you get a 0.8ohm pod and a 1.2ohm pod.
What I like about these pods and what voopoo have done is clearly marked on the pod which coil is in each one so you don’t get confused.
They’re clear pods and when attached in the device you can see you juice level clearly. They have a small duck beak style mouth piece which like simular devices you snap off to refill.
Once the mouth piece is of there’s a silicone bung which goes along the top of the pod to reveal the fill port. As always with these silicone bungs after time will they break and then potentially the pod becomes useless but with them being throwaway pods it’s not the end of the world.
With both pods I kept the airflow half open as this is where I found them best but the airflow adjustment does really change the type of vape you can get with the 0.8ohm you can get a nice restricted mtl to a loose mtl and the 1.2 ohm you get a very tight Draw to a almost perfect mtl draw for me.
I didn’t notice to much difference in the wattage settings if I’m honest I left it on the highest for both and the flavour is fantastic, I slightly enjoyed the flavour more from the 0.8ohm coil but prefered the draw from the 1.2ohm.
I found with both pods I was getting a full working day of vaping out the battery which is a great possitive.
Im also happy to say that I’ve experienced absolutely no leaking or condensation with a closed pod system you wouldn’t expect leaking but you never know!
Pros and Niggles
Pros
• Great flavour
• Easy to carry
• No leaking
• Airflow adjustment
• Good battery life
• Autodraw is great
Niggles
• Silicone bung could break eventually
• Not much difference in power settings
Overall Thoughts
Overall voopoo have once again done very well on producing a easy to use mtl vape which is tiny and produces great flavour. The autodraw works perfectly every time and with the added airflow adjustment this means it Caters to anyone who likes mtl from a looser mtl to a tight Draw.
As always a massive thank you to sue at Healthcabin for sending me this over for review its very much appriciated.
HealthCabin is also one of the biggest vape wholesale distributors in China, if you’re a vape business owner, just contact them to get competitive wholesale price.
This review was written by Sam The Vaping Gardner from POTV(Planet Of The Vapes), click to view original review.
