Our friends over at Healthcabin have sent out the new Voopoo Drag 3 kit for us to take a look at. The drag series of mods has been quite popular over the last couple of years, so let’s take a look at what’s on offer with this refreshed mode in this drag 3 review.
- 86 x 50.9 x 24.9mm
- Dual 18650
- Output 5~177W/8.4V
- Resistance range 0.1~3.0ohms
- Kit includes TPP tank and 2 coils
The Drag 3 mod is quite a departure from its predecessors design wise, my initial impression was that it looked more like a lost Vape therion (another classic design), and I was surprised by just how lightweight it felt when I removed it from the box at just 118.4 grams. The resin panels and bold “Drag” logo on the sides in previous models have been replaced by a “leather” wrap around the sides, and in this Prussian blue variant this has a slightly strange almost papery texture. Whilst it still retains a large Drag 3 logo embossed on one side of the leather, this is certainly a lot more subtle than before.
The battery compartment is now accessed from the bottom and is clearly marked for polarity with a plastic inner battery sleeves. This closes very well and I’ve had no issues with the door popping open in pockets and the like.
The 510 plate is offset to the back of the mod. It’s raised up 0.2mm above the top of the chassis which means you might experience some minor gaps with larger atomizers, and there’s a slight lip along the upper edge of the chassis which means that anything over 23.9mm will overhang slightly as well which is a slightly odd choice.
All the buttons are well placed with a nice positive click and zero button rattle. This combined with the “leather” grip has made for a very pleasant user experience. As with some of their more recent releases, there’s a large bright screen with two optional “themes” (horizontal and vertical), although for me the default vertical layout made more sense.
As you would expect from a Gene chip, response time is excellent with a host of safety features built in, and with a maximum output of 177W/8.4V, it should have you covered in most situations. Out of the box you only have access to wattage modes, an optional firmware with extra modes like temperature control is available for download at here. Two minor niggles I have are that although you can lock the buttons by pressing “fire + up”, this also locks out the fire button, and if you leave the mod sat for half an hour it goes into a deep sleep mode and will need two button presses to actually fire (one to wake it up, the second to fire).
If you purchase the full kit, you also get the new TPP tank. This actually owes more design cues from the Voopoo pod kits as it uses a plastic tank held into an airflow control with a standard 510 connector. In this international version, the tank has a whopping 5.5ml capacity. Sadly here in the UK, you’ll be limited to just 2ml, with a removable 810 drip tip (the kind with o-rings). As an added bonus, you can also use earlier PnP pods and coils in the airflow base if you have any of those around.
Two of the new mesh TPP coils are included which although they have a single bore, utilise three connectors (one positive, two negative?) which effectively gives you a dual coil setup with two heating areas. Performance on these has been great although I wouldn’t say it’s miles ahead of the competition, and sadly the actual coil material isn’t stated anywhere.
Pros
- Great build quality and much more subtle branding
- Responsive Gene chip
- Optional firmware with TC available
- Good performance from the TPP coils
Cons
- Coil material not stated
- Deep sleep mode can occasionally be frustrating
Drag 3 Review Conclusion
This new Drag 3 kit gives the kit a much more subtle, cleaner look distinguishing it from its predecessors, and I have to say it looks all the better for it. It’s also much more comfortable to use as well. Out of the box, you just have the basic wattage settings which is perfect for newer vapers, but of course there’s the option to add advanced features via a firmware update if you want which is always welcome. The TPP tank is a perfect companion to the kit, and the ability to use the airflow base with previous PnP tanks/coils is an added bonus. Of course with the 510 connector you’re not locked into the Voopoo tank/coil route as you can use any of your own atomisers as well. If you’re in the market for a dual battery mod, then you might want to add this to your short list.
Many thanks to Healthcabin for sending the Drag 3 kit out for review. As always, they’ve asked me to remind you that to see the best prices on their site, you need to be logged into your Healthcabin account.
This review was written by Antony from POTV(Planet Of The Vapes), click to view original review.
