The Aspire Tigon Tank is a newly designed subohm tank from Aspire with 2ml/3.5ml capacity. The Aspire Tigon supports MTL and DL vaping by using different coils and drip tips. It comes with two type of coils: a 1.2ohm coil suitable for MTL vape and a 0.4ohm coil suitable for DL vape. The Aspire Tigon adopts adjustable bottom airflow system, and you can adjust the airflow to meet your different vaping needs. Plus the easy top filling design, the Aspire Tigon makes refilling easier and can avoid leaking effectively.






The easy maintenance Aspire Tigon tank is of course removeable and as previously stated comes in a standard 3.5ml version and a 2ml TPD version, both have interchangeable 510 drip tips for either MTL or DTL style vaping.



The Tigon tank comes supplied with a choice of MTL, longer style, drip tip and a slightly wider bore ‘stubby’ style drip tip more suited to restricted DTL hits.




Filling couldn't be simpler in a child proof/leak proof tank of this type. First pull up on the top cap, then with your thumb or finger on the marker, slide open the top cap to reveal the silicon leak proof seal of the fill port. The silicon fill port on the TPD version tank has a self-sealing valve into which you can insert your chosen filling bottle nozzle to fill the tank. Closing the tank is the opposite, slide the top cap back into place covering the silicon seal and push down.
Remember, when using a new coil, to let the cotton of the coil saturate in the e-liquid for 5 minutes or so before you start to vape. This will ensure that you don't get dry hits or damage the coil.



On the Aspire Tigon tank, coil replacement is just a case of unscrewing the base hardware, pulling out the old coil and replacing with a new one. Then screwing the base hardware back on again. Note that the Tigon tank can still hold e-liquid when changing the coil, this is because the wicking holes in the tank are covered by a spring loaded sleeve that will slide shut sealing the holes when the coil is removed.
Remember, before using a coil for the first time to let it stand for 5 minutes after filling with e-liquid to saturate the coil and avoid dry hit and damage to the coil.



When removing and/or replacing the glass tube on the childproof TPD version of the tank, you need to follow these steps. First, unscrew and remove the base hardware and pull out the coil. Then invert the tank and using the special key provided, unlock the top hardware by placing it in the slot of the screw holding the top hardware (see diagram). Next, remove the glass tube. Replace the glass tube and follow the steps in reverse, (it is easier to place the screw onto the key first to locate it into the top hardware), secure the screw, insert the coil and replace the base hardware.
Remember, before using a coil for the first time to let it stand for 5 minutes after filling with e-liquid to saturate the coil and avoid dry hit and damage to the coil.



The first Aspire product to use an ingenious design that will seal the wicking holes in the tank when the coil is removed.



Brand: Aspire
Unit: 1Set
Size: 24.5 x 52mm (3.5ml standard)
Capacity: 3.5ml
Coil: 0.4ohm Coil(23-28W), 1.2ohm Coil(10-12W)
Package: Gift Box

Each set contain:
1pc Tigon Tank(3.5ml, 0.4ohm pre-installed)
1pc Glass tube
1pc Extra drip tip
1pc Coil (1.2ohm)
10pc O-rings
1pc User Manual
1pc Warranty Card



Save Money Instructions:

1.Get discount coupon codes before completing the order.
2.Redeem your reward points during checkout.
3.Become one of our wholesale customers to get VIP price, join our wholesale program now.
Your satisfaction is our top priority. Feel free to contact us at any time any place.